
N-8600MS
IP多功能型對講主機
N-8600MS
N-8600MS是一款採用分組音訊技術的IP多功能主機站。將 N-8600MS 連接到 IP 網路(LAN 或 WAN),可以在 N-8600MS 和連接到 IP 內通交換器的內通站之間或 N-8600MS 設備之間進行高音質的免持或聽筒通話。此外,N-8600MS 還可透過網路與多介面單元結合使用。多功能主站提供液晶顯示器、自動撥號功能(可實現一鍵撥號)、耳機端子和外部揚聲器端子。可從 PoE(乙太網路供電)交換集線器供電。 (在這種情況下,不需要交流電源供應器。)可以使用選購的 YC-280 牆壁安裝支架將該工作站安裝到牆壁上。
- 配備液晶顯示器
- 免持或聽筒通話
- 自動撥號功能
- 耳機終端機
- 外部揚聲器端子
- 高音質
- PoE
- 狀態LED
* 0 dB = 1 V
電源
Power supply device that complies with IEEE802.3af standard or
12 V DC (supplied from the AC adapter (option)
12 V DC (supplied from the AC adapter (option)
消耗功率
Use of the AC adapter (12 V DC): 2.5 W (station only)
Use of the PoE (48 V DC): 3 W
Use of the PoE (48 V DC): 3 W
Speech Method
Hands-free or handset conversation
Audio Frequency Range
300 Hz - 7 kHz
Hands-free
Speaker: 5.7 cm (2.24") cone-type
Microphone: Omni-directional electret condenser microphone
Microphone: Omni-directional electret condenser microphone
Handset
Receive path: Dynamic type, Send path: Electret condenser microphone
Network Section
Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast, Multicast
Number of paging destinations: Unicast (max. 16), Multicast (max. 191)
Connector: LAN: RJ45 connector (PoE compatible)
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
Quantifying bit number: 16 bits
Voice encoding method: Sub-band ADPCM, Cryptosystem
Voice packet loss recovery: Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software)
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast, Multicast
Number of paging destinations: Unicast (max. 16), Multicast (max. 191)
Connector: LAN: RJ45 connector (PoE compatible)
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
Quantifying bit number: 16 bits
Voice encoding method: Sub-band ADPCM, Cryptosystem
Voice packet loss recovery: Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software)
Display
LCD: Alphanumeric characters (16 characters x 2 lines)
指示燈
Status lamp
External Speaker Terminal
Maximum output 0.5 W, 8 Ω, screwless connector (2 pins)
Headset Terminal
Speaker: 150 Ω, Ø3.5 mm (0.14") mini jack
Microphone: -49 dB*, Ø3.5 mm (0.14") mini jack
Microphone: -49 dB*, Ø3.5 mm (0.14") mini jack
Installation Method
Desk/Surface mounted master station
(When mounting to the wall, use the optional YC-280.)
(When mounting to the wall, use the optional YC-280.)
工作溫度
0 °C to +40 °C (32 °F to 104 °F)
工作濕度
90 %RH or less (no condensation)
外觀
Body, Handset: ABS resin, gray
尺寸
148 (W) x 208 (H) x 70.5 (D) mm (5.83" x 8.19" x 2.78")
(excluding a curl cord section)
(excluding a curl cord section)
重量
770 g (1.7 lb)
附屬品
CD (for PC setting, maintenance use) …1
選配品
Wall mounting bracket: YC-280, AC adapter: AD-1210P, AD-1215P
請下載資料以獲取完整規格。
可選配件

The IP master station unit is designed for use with TOA's packet intercom system (IP network compatible intercom system) that employs the packet audio technology and can be connected to an existing local area network (LAN) or wide area network (WAN).
Network shall be made possible using RJ45 connection via switching hub. Connecting the station to a switching hub with PoE functionality eliminates the need for an AC adapter. Network interface shall be I/F 10BASE-T/100BASE-TX (Automatic-Negotiation) Auto MDI/MDI-X compatible Network Protocol TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP.
The IP master station shall be able to connect to fibre-optic networks without restriction on operation distance and shall be possible to broadcast up to 8 paging destinations using unicast transmission and up to 191 in multicast.
By connecting the IP master station unit to a LAN via its RJ45 connector shall make it possible to broadcast conversation and paging calls between IP stations. An emergency message can be programmed into the IP master station and broadcast to a pre-programmed zone with the key operation or external control input. The IP master station shall employ echo cancellation and will allow hands-free duplex operation without the need to lift the handset.
The IP master station shall be able to initiate an all-call page to all other stations simultaneously to all programmed paging groups within the system. It shall be possible to remove stations, through programming, from receiving all-call and restrict any station from initiating an all-call. The master station shall permit up to 8 BGM sources.
The master station shall also perform the following features: Voice calling, Automatic connection, Continuous call, One-touch dialing, Call hold, Automatic call forwarding, Emergency paging, Scan monitoring, Three-party conference and many more.
The IP multifunctional master station shall have a 2 line, 16-alphanumeric character information LCD display. LCD display and a headset terminal plus an external speaker terminal employing circuitry that prevents acoustic feedback or echo generated when the voice output from the internal speaker enters the microphone The IP Master station shall include dedicated software that will enable centralised control and log verification and system maintenance from a personal computer. Line supervision can also be performed using a personal computer and Internet browser.
The IP master station can be desk mounted or mounted to a wall using an optional wall-mounting bracket.
The dimension of the IP master station shall be 148 (W) × 208 (H) × 69.7 (D) mm (5.83” x 8.19” x 2.74”). Weight shall be 770 g (1.7lb.) and both body and handset shall be finished in light grey ABS resin.
Optional extras: YC-280 wall mounting bracket. AD-1210P, AD-1215P AC adapter manufactured by TOA Corporation.
請登入以存取更多技術資料,例如軟體、韌體或EASE檔案。