H-3WP

二音路造型喇叭

H-3WP

H-3WP 是一款壁掛式戶外 2 分音揚聲器，可提供廣泛水平的分散效果。

2 路設計揚聲器
圓頂高音揚聲器和釹磁錐低音揚聲器
揚聲器之間以及每個揚聲器單元正前方的優質音頻
180° 覆蓋模式，消除死音頻空間
低阻抗(8 Ω / 16 Ω) 或高阻抗(70 V / 100 V)
安裝方便、不顯眼高於頭部高度
阻燃 ABS，符合 UL94：V-0
防風雨

規格 A&E規格下載

外箱型式

Sealed type

額定輸入

30 W (16 Ω, high impedance)

輸入功率

150 W (Continuous program/8 Ω)
50 W (Continuous pink noise/8 Ω)

額定阻抗

8 Ω, 16 Ω
100 V line: 330 Ω (30 W), 670 Ω (15 W), 1.3 kΩ (7.5 W)
70 V line: 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 1.3 kΩ (3.75 W)

輸出音壓電平

89 dB (1 W, 1 m) at installation in 1/2 free sound field
(Measured by installing the unit in the center of a wall.)

頻率響應

100 Hz - 20 kHz (-10 dB) at installation in 1/2 free sound field
(Measured by installing the unit in the center
of a wall.)

分音頻率

4 kHz

喇叭組成

Low frequency: 10 cm cone-type x 2
High frequency: 2.5 cm dome-type (neodymium magnet)

輸入端子

Detachable screw terminal, (+)/(-) 2 each (for bridging connection)

使用電纜線

Solid cable, stranded cable: 0.2 - 2.5 mm² (AWG No.24 - 14)

Water Protection

IPX4

安裝環境

Indoor installation, under-eave installation(*1)

外觀

Enclosure: Fire-resistant ABS resin, black
Front frame: Fire-resistant ABS resin, off-white, paint
Punched net: Steel plate (zinc plating), off-white, powder coating
Base frame: Stainless steel

尺寸

295 (W) x 318 (H) x 129 (D) mm

重量

3.3 kg

附屬品

Front grille x 1, Base frame x 1, Electrical box mounting screw x 1 set

Recommended Electrical Box

2-gang type

(*1) Avoid installaing the speaker in locations close to the seashore or in indoor swimming facilities that are not well ventilated. In such locations, the bracket may be vulnerable to corrosion, eventually allowing the speaker to fall resulting in personal injury.

請下載資料以獲取完整規格。

The speaker shall be a two-way, sealed enclosure suitable for wall-mounting. The speaker shall have an external appearance that is visually pleasing and blends well with surrounding building architecture and fixtures. Speakers requiring visible external mounting brackets shall not be acceptable. The loudspeaker shall utilize high quality components with Neodymium magnets for high power handling. The high frequency component shall be a 1" dome tweeter and the low frequency components shall be dual 4" cone woofers. The speaker shall be compatible with low and high impedance speaker systems and shall include a built-in 70.7/100 V matching transformer with the following selectable tap settings: 30 W, 15 W, 7.5 W, 3.75 W (70.7 V) and 30 W, 15 W, 7.5 W (100 V). The speaker shall also have selectable impedance settings of 8 ohms and 16 ohms. The output sound pressure level at a distance of 1 m with 1 W of input power applied shall be 89 dB SPL. The rated power handling (Continuous Program) shall be 150 W at 8 ohms and 30 W at 16 ohms or with matching transformer. The speaker shall have a frequency response from 100 to 20k Hz. The speaker shall employ a high quality internal passive crossover circuit with a crossover frequency of 4k Hz with optimized filter slopes of -12 dB per octave low pass filter and -18 dB per octave high pass filter. The speaker shall include a removable terminal block connector, screw terminal type, with loop-through terminations and accept AWG #14 - #24. An internal protection circuit shall prevent damage to the high frequency component in an overload condition. Once activated, the circuit shall reduce the input signal and reset automatically after approximately ten seconds once overload condition is removed. The speaker grille material shall be rolled steel plate (H-3) / stainless steel (H-3WP) with a paintable white finish. The speaker enclosure shall be fire-resistant ABS resin with UL94:V-0 rating. Dimensions shall be 11.6” x 12.5” x 5.1” (295 x 318 x 129 mm) and weight of 7.3 lbs. (3.3 kg).

The loudspeaker shall be TOA model H-3 / H-3WP.

請登入以存取更多技術資料，例如軟體、韌體或EASE檔案。

登入

聯絡我們