H-1
二音路造型喇叭
H-1
H-1 是一款圓柱形小型嵌入式二分頻揚聲器，可確保高品質的聲音重現。其外殼的安裝角度可最大調整至 90 度。
- 時尚迷人的2 分頻設計揚聲器
- Ferrofl 液冷平衡球頂高音揚聲器和釹磁錐低音揚聲器
- 狹窄的覆蓋區域可實現受控的聲音
- 聲音方向可在90° 範圍內調整
- 內建變壓器可實現高阻抗和低阻抗
- 高功率處理能力
- 標準安裝方便電氣接線盒
- 防火 ABS 外殼 (UL 94-V0)
30 W (continuous pink noise/4 Ω)
100 V line: 830 Ω (12 W), 1.7 kΩ (6 W), 3.3 kΩ (3 W)
70 V line: 420 Ω (12 W), 830 Ω (6 W), 1.7 kΩ (3 W), 3.3 kΩ (1.5 W)
(Measured by installing the unit in the center of a wall.)
High frequency: Balanced dome-type
Punched net: Steel plate, white, paint
Adapter frame: Stainless steel
as an optional accessory under the model number of HY-H1.)
※ It is also possible to mount the speaker directly to the electrical box (without a cover).
請下載資料以獲取完整規格。
The loudspeaker shall be a two-way, sealed enclosure suitable for wall or ceiling mounting with an external appearance that is aesthetically pleasing and blends well with surrounding building architecture and fixtures. Loudspeakers requiring visible external mounting brackets shall not be acceptable. The loudspeaker shall utilize high quality components. The high frequency component shall be a 1" balanced dome tweeter, Ferrofluid-cooled for high power handling, The low frequency component shall be a 3" x 2" cone woofer with Neodymium magnet for improved low frequency response. The speaker shall employ a high quality internal passive crossover circuit with optimized filter slopes and a crossover frequency of 5k Hz. The loudspeaker shall have a smooth frequency response from 120 to 20k Hz. The output sound pressure level at a distance of 1 m with 1 W of input power applied shall be 85 dB SPL. The rated power handling (Continuous Program) shall be 90 W (4 ohms) and 12 W with matching transformer. The loudspeaker shall be compatible with low and high impedance speaker systems and shall include a built-in 70.7/100 V matching transformer with the following selectable tap settings: 12 W, 6 W, 3 W, 1.5 W (70.7 V) and 12 W, 6 W, 3 W (100 V). The speaker shall also have selectable impedance settings of 4 ohms and 16 ohms. The loudspeaker shall include a removable terminal block connector, screw terminal type, with loop-through terminations and accept AWG #14 - #24. An internal protection circuit shall prevent damage to components in an overload condition. Once activated, the circuit shall reduce the input signal and reset automatically after approximately thirty seconds once overload condition is removed. The loudspeaker grille material shall be rolled steel plate with a paintable white finish. The loudspeaker trim piece shall be constructed of fire-resistant ABS resin with a paintable white finish. The loudspeaker grille frame shall be fire-resistant ABS resin with a paintable white finish. Dimensions shall be 12.28” x 4.96” x 3.54” (312 x 126 x 90 mm). The speaker shall weight 3.31 lbs. (1.5 kg).
The loudspeaker shall be TOA model H-1.
請登入以存取更多技術資料，例如軟體、韌體或EASE檔案。